Double Clevis Hydraulic Cylinder
Product Description
Product Detail
The 53-4592-106 double clevis hydraulic cylinder is a long-stroke 4000 Series model listed in the HCIC-2026 catalog. Its 106.06-inch catalog stroke places it in a different installation discussion from a compact actuator: the machine must have room for a long change in pin-center distance, and the brackets and hoses must remain controlled through the full motion.
For an OEM builder or maintenance team, the useful starting point is the complete dimensional row. It includes stroke, closed length, extended length, mounting dimensions, port, oil volume and weight. These values help engineers compare the model with an existing cylinder or a new machine layout before asking for a project quotation.
I. 53-4592-106 Specifications
| Item | Inch value | Metric value |
|---|---|---|
| Model | 53-4592-106 | 53-4592-106 |
| Series | 4000 Series | 4000 Series |
| Stroke, A | 106.06 in | 2,694 mm |
| Closed length, B | 48.00 in | 1,219 mm |
| Extended length, C | 154.06 in | 3,913 mm |
| Dimension D | 1.50 in | 38 mm |
| Dimension E | 2.06 in | 52 mm |
| Dimension F | 2.00 in | 51 mm |
| Dimension G | 7.00 in | 178 mm |
| Dimension J | 2.06 in | 52 mm |
| Dimension K | 19.50 in | 495 mm |
| Port | 3/4 in NPTF | 3/4 in NPTF |
The catalog does not provide a universal pressure, load or service-life guarantee for the 53-4592-106. Final selection requires the machine's real load path, hydraulic conditions and safety review.
II. Why the Long-Travel Geometry Matters
A pin-to-pin cylinder does not work in isolation. The fixed pin, moving pin and connected mechanism define the motion. For the 53-4592-106, the catalog lists 48.00 inches closed and 154.06 inches extended. The machine therefore needs a controlled path across a large change in pin-center distance.
Before installation, map the two end positions and several intermediate positions. Check whether the cylinder remains within the intended angle range, whether the mounting brackets carry the load in the correct direction and whether the surrounding structure leaves room for the body, rod, pins and hose movement.
A long stroke also makes routing more important. The hoses must follow the moving assembly without stretching, snagging or rubbing against the frame. Service teams should be able to reach the port and mounting hardware without dismantling unrelated equipment.
III. Product Details That Affect an OEM Review
3.1 Defined mounting envelope
The catalog dimensions D, E, F, G, J and K provide the dimensional starting point for the mounting arrangement. Compare them with the machine drawing rather than assuming that the long stroke is the only fitment requirement.
3.2 3/4 in NPTF port
The 3/4 in NPTF port must match the existing hydraulic plumbing and fitting practice. Verify the adapter, sealing method, hose bend radius and port orientation before the cylinder is installed in a restricted space.
3.3 Oil-volume planning
The product row lists 1.7 gallons fill oil volume and 6.0 gallons extended oil volume. The hydraulic system must have enough usable reservoir volume for the cylinder, hoses, valve block and actual operating position. These catalog values are not a complete reservoir-sizing calculation.
3.4 Weight and handling
The listed weight is 208 lb. That value matters during transport, installation planning and bracket design. Provide a safe lifting method and confirm that the machine structure can support the cylinder and transfer the working load through the pin joints.
IV. Project Applications
The 53-4592-106 can be reviewed for long-travel OEM equipment and replacement projects that use a pin-to-pin cylinder. It is a candidate for mechanisms where the fixed and moving mounting points are far apart at full extension, provided the machine geometry matches the catalog dimensions.
A quotation should not be based on the model number alone. HCIC needs the machine drawing or accurate field measurements, operating pressure, load direction, cycle frequency, pin details and hydraulic connection information to assess the application.
V. What to Send for a Quotation
- Existing cylinder model, photographs and nameplate
- Closed and extended pin-center measurements
- Intermediate motion positions or a machine drawing
- Pin diameter, bracket width and bushing details
- Hydraulic schematic, port and fitting information
- Load direction, operating pressure and cycle frequency
- Hose routing and service-access constraints
- Safe handling and installation requirements
VI. FAQ
What stroke is listed for 53-4592-106?
What are the closed and extended lengths?
Which port is listed?
What oil volumes are shown?
What is the listed weight?
Does the catalog guarantee a load capacity or working pressure?
VII. Conclusion
The 53-4592-106 pin-to-pin hydraulic cylinder is a long-stroke 4000 Series option for mechanisms that need a defined change in pin-center distance. Its 106.06-inch stroke, 48.00-inch closed length, 154.06-inch extended length, 3/4 in NPTF port, 1.7-gallon fill value, 6.0-gallon extended value and 208 lb catalog weight give an OEM team a precise basis for initial fitment review.
Send the full motion geometry, mounting details, hydraulic data and handling plan to HCIC before ordering. That information is needed to determine whether this long-travel model matches the complete machine.
VIII. About HCIC
HCIC, also known as Jinan Huachen Industrial Co., Ltd., supplies hydraulic cylinders, hydraulic power units and related components for vehicle, waste-handling, construction and industrial equipment. Product suitability should be confirmed against the complete machine design and applicable safety requirements.