HSG Single Rod Double Acting Cylinder – Heavy Load Lifting | HCIC
Product Description
Product Detail
HCIC manufactures high-quality FC Front Mount Cylinder engineered for Dump Trucks and Tipper Trucks. With 28+ years of hydraulic expertise, ISO 9001 certified manufacturing, and 100% pressure testing, our telescopic hydraulic cylinders deliver reliable performance in the toughest conditions.
I.Core Parameter Specifications (Standard & Ready for Direct Selection)
Basic Technical Specs:
Rated Pressure: 16MPa (Grade E) / 21MPa (Grade G). Peak can hit 25MPa.
Bore Sizes: 40/50/63/80/100/125/160/200/250mm. Full standard range, no gaps.
Rod Diameters: 20/25/32/40/50/63/80/100/125mm. Matched to the bores above, no guesswork.
Max Stroke: Standard up to 2000mm. We can customize to 3000mm if you need it.
Speed Ratio: 1.33/1.46/2.0. Covers all common flow/thrust setups.
Operating Temp: -20℃ to +80℃. Handles cold and heat without breaking a sweat.
Mounting Types: Rear clevis, end flange, middle flange, trunnion. All the usual mounting options you’d expect.
Technical Specifications
| Bore (mm) | Rod Diameter (mm) | Push Force (kN) | Pull Force (kN) |
| 40 | 20 | 20.1 | 15.1 |
| 50 | 25 | 31.4 | 23.6 |
| 63 | 32 | 49.9 | 37.0 |
| 80 | 40 | 80.4 | 60.3 |
| 100 | 50 | 125.7 | 94.2 |
II.Key Product Features
(1). Double Acting, High Efficiency: Pushes from the blind end, pulls from the rod end. Strong power both ways. Movement is smooth, no jolts. Perfect for high-frequency push-pull, lifting, clamping jobs.
(2). Tough & Wear Resistant: Barrel’s 45# seamless steel, honed to Ra≤0.4μm. Rods get ≥25μm hard chrome plating. Resists rust, lasts way longer than cheaper alternatives.
(3). Sealed Tight, Zero Leaks: NOK/Parker imported seals. High temp resistant, anti-aging. Optional cushioning cuts end-stroke impact, protects your gear.
(4). Compact & Simple to Install: Welded integral design, no tie rods. Rigid, small footprint. Multiple ports: metric/imperial threads, flanges. Fits whatever piping you’re running.
(5). Fully Customizable: Need something off-spec? We do it. Non-standard strokes, special pressures, 304/316 stainless steel, high-temp seals, built-in valves. Whatever your conditions need.
III.Core Advantages
(1). Universal & Budget-Friendly: ISO/DIN standard dimensions, so it swaps globally. Mass production keeps pricing steady, low after-sales costs.
(2). Tough & Stable: Runs reliably in dust, moisture, vibration. Fail rate’s low. Maintenance is basic: just check oil and seals regularly.
(3). Precise & Controllable: Consistent thrust/tension, adjustable speed, accurate positioning. Great for automated lines and precision equipment.
(4). Certified & Safe: ISO9001, CE certified. Every unit gets 100% pressure tested before shipping. No surprises.
IV.Where They’re Used
(1). Construction Machinery: Lifting, tilting, dozing on excavators, loaders, bulldozers, graders.
(2). Mining Machinery: Push-pull/clamping for hydraulic supports, drills, crushers.
(3). Material Handling: Lifting, telescoping, steering on forklifts, truck-mounted cranes, trailers.
(4). Industrial Equipment: Actuators for presses, bending machines, automated lines.
(5). Ag & Sanitation: Lifting/dumping on tractors, sanitation trucks, dump trucks.
V. Customization Service
HCIC offers full customization for all hydraulic cylinders:
· Custom bore, rod diameter, and stroke length
· Working pressure adjustment up to 10,000 PSI
· Multiple mounting options: clevis, flange, trunnion, pin eye
· Special seal materials for high-temp, low-temp, or corrosive environments
· Custom paint, coating, and labeling
· OEM / private label manufacturing
VII.FAQ: