Single Acting Hydraulic Pump
Product Description
Product Detail
I.Product Introduction
Hydraulic axial piston variable pump, low noise level, high efficiency, reliability; Axial and radial load capacity of drive shaft; favorable power/weight ratio, versatile controller range and short control response time.
II.Fault diagnosis
Repair process:
1. Bake the scratched part with oxyacetylene flame (master the temperature and avoid surface annealing), and bake the oil that permeates the metal surface all the year round until there is no spark.
2, the scratched part with Angle grinder surface treatment, grinding depth of more than 1 mm, and along the guide rail grinding groove, preferably dovetail groove. Both ends of the scratch are drilled deeper to change the force situation.
3. Clean the surface with absorbent cotton dipped in acetone or absolute ethanol.
The following are the advantages of our products:
1. Superior control and guidance systems.
2. Ability to be customized according to specific applications.
3. Compact and light in weight.
4. Low power consumption and low noise.
5. Higher operating speeds and faster response.
6. Low air consumption.
7. Variety of application configurations.
8. Excellent dynamic load capacity.
9. High durability and resistance to fatigue.
10. Simple and cost-effective design.
III.Specification
All parameters can be customized
Parameters of the sample
| Name | ATUS A10VSO Series axial piston variable pump |
| Series | Series 31 |
| Sizes | 18, 28, 45, 71, 100, 140 |
| Nominal Pressure | 4000 psi (280 bar) |
| Maximum Pressure | 5100 psi (350 bar) |
| Operation Mode | Open Circuit |
IV.Production
HCIC has a professional product quality test during the production process. These include the cylinder friction test of the hydraulic cylinder, the shock durability test, the drift rate test, the circulation test and the pressure test (the rated pressure is 150%in 5 minutes). The hydraulic cylinder test system is divided into single -acting and dual -action tests. When 100 % complete the test, they will be transferred to the quality inspection department for the final quality inspection link, and finally paste the label to put the market.
1. Superior control and guidance systems.
2. Ability to be customized according to specific applications.
3. Compact and light in weight.
4. Low power consumption and low noise.
5. Higher operating speeds and faster response.
6. Low air consumption.
7. Variety of application configurations.
8. Excellent dynamic load capacity.
9. High durability and resistance to fatigue.
10. Simple and cost-effective design.
V.Our Service
HCIC is a one-stop telescopic hydraulic cylinder manufacturer with rich experience in customizing and designing hydraulic cylinders for boom trucks. HCIC can design and produce hydraulic cylinders no matter how complex. We adopt European technology and American standards to provide customers with a full set of customized services from design to delivery. Our standard oil cylinders include rod hydraulic cylinder, walking machine hydraulic cylinder, welding oil cylinder, snow shovel oil cylinder, telescopic oil cylinder, hydraulic dump oil cylinder, woodcutter hydraulic cylinder, loader hydraulic cylinder, and hydraulic bucket tilt oil cylinder. We can also customize it.
VI.FAQ
Q1: Can you provide samples before large orders?
A: Yes.
Q2: Can you produce non-standard or customized cylinders?
A: Yes, we have our own factory, we can meet the needs of customers.
Q3: How long is the warranty?
A: We offer a 12-month warranty.
Q4: Can I print my brand on the product?
A: Of course.
Q5:When is your delivery time?
A: 3-5 days if there is stock, 15-25 days if there is no stock.
Q6:How about your quality?
A: Most domestic excavator/loader/engineering vehicle companies are our customers, and we are confident to provide good products for foreign customers.