Small Trailer Hydraulic Cylinder:4TG-E130x806

Introductions：

If you run small trailers for construction, farming, or waste hauling, you know the drill: you need a lift that can handle heavy loads, but there’s barely any room to install it. And when you do get a cylinder in place, it often sputters or stalls under full loads. The 4TG-E130x806 multi-stage cylinder was built to fix these exact problems—bringing tough lifting power to compact trailer setups, no compromises needed.

Breaking Down the 4TG-E130x806 Model

Every number and letter in this model name is there to solve the problems you face daily with small trailer lifts:

• 4T: This means a 4-stage telescopic design (EXTENSION N. = 4). We designed the nested sleeves to tuck tight when retracted, so it fits into the tiny mounting spots on small trailers—no more cutting into the chassis or custom fab work just to get a lift installed. When extended, it hits an 806mm power stroke (POWER STROKE), which is exactly the lift height you need to dump heavy loads without straining the trailer.

• G-E: It’s part of our TG series single-acting lift cylinders, built to work with the standard hydraulic systems on most small trailers. No more dealing with mismatched parts that make the lift slow or inefficient—this cylinder syncs right up with what you already have.

• 130x806: The 130mm maximum sleeve diameter gives it the strength to handle heavy weights, and the 806mm power stroke is tailored for small and mid-size trailers. No more lifts that stop short before you can dump your load, or sleeves that bend under pressure.

The Specs That Make This Cylinder Work for You

We didn’t just guess at the numbers—we tested every spec to match real small trailer jobs:

• Extension Number (EXTENSION N.): 4 stages
• Power Stroke: 806mm
• Mass: 43kg
• Working Volume: 8.5L
• Max. Working Pressure: 180bar
• Tipping Capacity: 15–25 tons

How This Cylinder Solves Your Biggest Trailer Lift Headaches

（1）. Compact Design Eliminates Installation Hassles

The 4-stage nested sleeves fold down to a slim profile, so it fits into the tightest spots on any small trailer—pickup-mounted dump trailers, farm utility trailers, even compact construction haulers. You won’t need to hire a welder or modify the trailer frame to get it in place, which saves you time and money on retrofits. And with an 806mm stroke and 15–25 tons of tipping capacity, it can lift and dump full loads even in narrow job sites or farm rows where space is at a premium.

（2）. 180bar Pressure Means No More Stalls Under Load

Most small trailer hydraulic systems put out less pressure than this cylinder can handle—180bar max working pressure means it pushes through heavy loads smooth and steady. You won’t deal with the annoying jerks or complete stalls that happen with cheaper, lower-pressure cylinders when you’re hauling gravel, hay, or scrap metal. At just 43kg, it also doesn’t add extra weight to the trailer, so you keep better fuel mileage and handling on the road.

（3）. 8.5L Working Volume Speeds Up Your Workday

We sized the 8.5L working volume to match the 4-stage telescopic action perfectly. Hydraulic oil moves faster through the cylinder, so it lifts and retracts in seconds instead of minutes. That cuts down on the time you spend waiting for the lift to move between loads, which adds up to more hauls per day. No more standing around while your lift creaks through a cycle—this cylinder keeps your work moving.

Where You’ll Use the 4TG-E130x806 Every Day

This cylinder isn’t just for one job—it’s built to handle the messy, tough work across three key industries:

• Construction: If you run small site trailers hauling bricks, concrete blocks, or tools, this cylinder fits in tight job site spaces and lifts heavy building materials without slowing down. It’s the fix for those cramped urban construction lots where bigger lifts just won’t fit.

• Agriculture: For farm trailers moving feed, hay bales, or harvests, it powers through muddy fields and rutted dirt roads without losing lift power. Even when the trailer’s loaded down with corn or wheat, it dumps clean and quick.

• Waste Recycling: Compact recycling trailers collecting cardboard, metal cans, or plastic need a lift that can handle bulky, uneven loads. The 15–25 ton tipping capacity adapts to whatever you’re hauling, so you don’t have to make extra trips to the dump.

From bumpy construction yards to wet farm fields, the 4TG-E130x806 keeps going. It’s not just a hydraulic part—it’s the solution to the small trailer lift problems that have been slowing you down for years.

For More details please email us "davidsong@mail.huachen.cc" or google search "HCIC hydraulic"